Jtalv Factory Customized 4 Inch Pneumatic Actuator Three-Piece 2way Threaded 3PC Pneumatic Ball Valve

• Customization: Available
• Media: Water,Oil, Gasacid
• Material: Stainless Steel
• Model NO.: Q611F-16P
• Connection Form: Thread
• Driving Mode: Pneumatic
• Nominal Pressure: Pn16.25.40
• Application: Industrial Usage, Water Industrial Usage
• Type2: Gate Valves
• Selling Units: Single Item
• Warranty: 1year
• Single Gross Weight: 4.000kg
• Temperature of Media: Medium Temperature,Normal Temperature
• Port Size: DN15-DN100
• Single Package Size: 34X25X25.Cm
• Low Pressure Gas Seal Testpressure: 0.6MPa
• Customized Support: Oemodm
• Type1: Ball Valves
• Strengthtest Pressure: PT2.4386.09.6MPa
• Applicabletemperature: -20~180c
• Power: Pneumatic
• Tructure: Ball
• Transport Package: Cartons/Wooden Cases
• Specification: 40*30*30
• Trademark: JTAIV
• Origin: Zhejiang, China
• HS Code: 8481804090
• Production Capacity: 10000

Product Description

Product Description

item	value
Warranty	1 year
Type	Pneumatic Three-piece Threaded Ball Valve
Customized support	OEM, ODM
Place of Origin	China
	Zhejiang
Brand Name	JTAIV
Model Number	Q611F-16P
Application	General
Temperature of Media	High Temperature, Low Temperature, Medium Temperature, Normal Temperature
Power	Pneumatic
Media	water, oil, gas, acid
Structure	BALL

1.Operating media: Dry orlubricated air, or the non-corrosive gassesthemaximum particle diameter mustless than 30μm 2.Air supply pressure: The Min supply pressure is 3 BarThe Max supply pressure is 8 Bar 3.Operating temperature: Standard:-20°C~+80C Lowtemperature:-40°C~+80°C High temperature:-20°C~+160°C 4.Travel adjustment: Have adjustment range of ±5 for the rotation at O°and 90° 5.Useoccasions: Indoor or outdoor

Double acting

Air supply connection is designed in accordancewith NAMUR Standard to install solenoid valves.

Indicator cover

The Namur drive pinion and the Namur top mountingconnection permit direct installation of accessoriessuch as limit switch box

Bottom connection mode

Bottom mounting connection is designed in accordancewith ISO5211 and DIN3337 standards for direct mountingwith valve gear boxes or mounting brackets

Compressed air is input from port A to make the left and right pistonsmove in opposite directions, The output shaft rotates counterclockwiseto open the valve and air on the sides of the two pistonsExcluded byport B.

Compressed air is input from port B to make the left and rightpistons move in opposite directions,The output shaft rotatesclockwise to close the valve and the sides of the two pistonsare empty.Gas is removed from port A

Compressed air is input from port A to make the left and right pistonsmove in opposite directions, The output shaft rotates counter clockwiseto open the valve and air on the sides of the two pistonsExcluded byport B.

When losing air or power, the center of the two pistons moves dueto the action of the spring, and the output Clockwise, close the valvethe air will be discharged from port A, and the intake of port B canaccelerate Close the valve.